|
THE
BENEFITS
1. ISO 9001:2000
Quality Assured
2.
Approved for Class One Chimneys and Class Two Flues.
3. Suitable for All Flues.
4. Less expensive than other methods.
5. Quick Clean Installation. |
|
|
|
What ever form of heating you use an efficient chimney is essential
for your health, safety and economy |
|
Thermocrete
Sealant is applied by a high pressure rotating spray machine. |
 |
The
sealant fills all the gaps and cracks leaving a smooth gas tight
coating on the inner surface. |
|
DENSE
REFACTORY CHIMNEY SEALANT
PRODUCED TO B.S. 4207 AND TESTED TO B.S 1902 |
|
TEST |
Minimum |
Maximum |
Mean |
| Bulk
Density |
145g/cm³ |
172g/cm³ |
158.5g/cm³ |
| Cold
crushing Strength @1000°C |
8.4N/mm² |
25N/mm² |
16.7N/mm² |
| Apparent
Porosity @ 1000°C |
40.5% |
53.5% |
47% |
| Permanent
Liner Change @ 1000°C |
-1.0% |
-2.6% |
-1.8% |
| Refractoriness
(P.C.E) |
1250°C |
1367°C |
1308°C |
| Thermal
Conductivity @1000 °C |
0.4W/mk |
0.58W/mk |
0.49W/mk |
| Resistance
to Carbon Monoxide |
|
|
100% |
|
The above
values are expected to be achieved under laboratory test procedures.
Site results can be expected to vary from these figures. Therefore
the above results do not constitute a specification.
|
| Thermocrete
Chimney Linings are committed to a program of expansion and development
and in the interests of progress we retain the right to alter the
above specifications at any time. |
|
|
6. Seals all Gaps and Cracks
7. Leaves a smooth Gas Tight Finish.
8. Impervious to Acid Attack.
9. Dose Not Effectively Reduce the Flue Size.
10. Environmentally Friendly. |
