HEAD OFFICE
Thermocrete Chimney Linings Alan Barnes
Thermocrete House, Mortimer Street Bradford BD8 9RL Tel. 01274 544442
 
 
THE PROCESS
01274544442
  
 


How the Thermocrete chimney lining system works.

The basic concept of the system is simple but extremely effective. A rubber former is inserted precisely in position through the entire length of the flue .Special techniques are used to keep the former centralised, even if the flue has a 45° bend. Thermocrete B2 material is pumped into the flue from the top of the chimney stack filling all voids, cracks and damaged joints. When the Thermocrete has hardened, the former is deflated and removed leaving a perfectly smooth cylindrical flue.


  All Theromcrete linings are installed complying to the building regulations 2002.

Industrial Applications - - - Industrial flues serving boilers up to 1.5 million BTU have been lined with Thermocrete The principal is exactly the same,with the pouring process being repeated in stages until the full height of the chimney is reached.


Head Office
Contact
Alan Barnes

e-mail
here

FAULTY FLUES
ARE DANGEROUS

Each Flue is isolated The Thermocrete System allows each appliance to operate with its own correct size flue within one chimney stack. This is essential in instances where appliances use different types of fuel.

PHONE
01274544442
NOW
Thermocrete Chimney Linings (Bradford)
Thermocrete House, Mortimer Street Bradford BD8 9RL Tel. 01274 544442
Copyright © all rights reserved Thermocrete 2001
web design by FWSdesign